Professional Network Infrastructure
Connective Solutions LLC designs and installs structured cabling, VoIP phone systems, surveillance and access control — built to standard by OSHA-certified technicians for small businesses, contractors and managed service providers.
What We Do
A connected business depends on a clean, well-documented backbone. We handle the physical layer and the systems that run on top of it.
Organized, standards-based copper and fiber cabling for offices, warehouses and multi-room sites — terminated, tested and labeled so future changes stay simple.
Modern voice over IP that runs on your network instead of legacy phone lines — cleaner call quality, easier moves and adds, and features that scale with your team.
IP camera coverage planned around your floor plan and entry points, with reliable recording so you can review what matters and keep an eye on the property.
Door and entry control that decides who gets in and when — from a single secured door to multi-entry sites, integrated with the rest of your low-voltage system.
Understanding The Basics
A plain-language look at the low-voltage building blocks behind a connected business — so you know exactly what you are paying for.
Instead of running individual cables wherever a device happens to sit, structured cabling lays out a planned, standards-based system for the whole building: horizontal runs to each work area, a backbone linking floors and rooms, and patch panels in a central rack.
Everything is terminated, tested and labeled, so when you add a desk, a camera or an access point later, the change is quick and predictable rather than guesswork.
Cat5e and Cat6 are twisted-pair copper cables used for the runs to desks, phones, cameras and wireless access points. Cat6 is rated to a higher frequency than Cat5e and is the usual choice for new Gigabit work, with a 100-metre channel limit per run.
Fiber carries data as light rather than electrical signals. It is used for backbone links between rooms, floors or buildings, and wherever distance or electrical interference would be a problem for copper.
PoE delivers both data and power down a single network cable, so devices like IP cameras, VoIP phones and wireless access points do not each need a nearby power outlet. That means cleaner installs and fewer electricians on site.
Common tiers are PoE (IEEE 802.3af, up to about 15 W), PoE+ (802.3at, up to about 30 W) and PoE++ (802.3bt, up to roughly 60–100 W) for higher-draw devices.
IP surveillance cameras connect to your network like any other device, are usually powered over the same cable via PoE, and record to a local recorder or storage so footage can be reviewed and viewed remotely.
Access control governs who can open which doors and when, using keypads, fobs or card readers. Because it lives on the same low-voltage backbone, it can be planned alongside cabling and cameras as one coherent system.
How We Work
Clear steps from first walkthrough to a tested, documented handover — so you always know where the project stands.
We review your space, current setup and goals to understand exactly what the project needs before any cable is pulled.
You get a clear plan for routing, equipment and coverage, scoped to your building and budget with no guesswork.
OSHA-certified technicians install to standard — neat runs, proper terminations and safe, code-conscious work.
Every line is tested and labeled, and you receive clean documentation so future support and changes are painless.
Who We Serve
We work directly with end clients and as the low-voltage partner behind other providers, across the kinds of sites that depend on dependable connectivity.
Reliable cabling, phones and cameras that simply work — without the overhead of an in-house infrastructure team.
A dependable low-voltage trade partner who shows up, installs to standard and hands the project back clean.
The on-site cabling and hardware install layer that lets your MSP deliver the connectivity your clients expect.
Tidy desk cabling, network-ready phones and wireless coverage for workplaces that need to move and add staff without rewiring.
Camera coverage at entries and points of sale, plus the cabling behind networks, phones and guest connectivity.
Backbone and coverage across larger floor plans, where cable distances, fiber links and durable runs matter most.
Standards We Build To
Low-voltage work is governed by widely used technical standards. Building to them is what keeps a network reliable, supportable and ready to grow.
The widely used standard family for commercial building telecommunications cabling — covering structured cabling layout, performance categories and termination practices for copper and fiber.
Cat6 twisted-pair is rated to 250 MHz and, like other category cabling, is designed around a 100-metre channel: roughly 90 m of permanent link plus patch cords. Planning runs around that limit keeps links solid.
The IEEE 802.3af / 802.3at / 802.3bt standards define how power and data share one cable, at roughly 15 W, 30 W and up to 60–100 W — the backbone of modern camera, phone and access-point installs.
ONVIF is an open specification that helps IP cameras and recorders from different manufacturers work together, so a surveillance system is easier to expand and is not locked to a single vendor.
Installations are carried out by OSHA-certified technicians, with safe, code-conscious practices on site — important on ladders, in ceilings and across active commercial premises.
Lines are tested and labeled, and you receive clean documentation of what was installed and where — the records that make future support, faults and changes far less painful.
Buyer FAQ
Quick, plain answers to the things businesses most often ask before scoping cabling, voice or security work.
It is a planned, standards-based cabling system for a whole building rather than a tangle of one-off runs. It usually includes cabling to each work area, a backbone linking rooms and floors, patch panels and labeled terminations — so adds, moves and changes stay simple and predictable for years.
Cat5e and Cat6 are twisted-pair copper cables for the runs to desks, phones, cameras and access points; Cat6 is rated to a higher frequency (250 MHz) and is the usual pick for new Gigabit work, with a 100-metre channel limit. Fiber carries data as light and is used for backbone links and longer distances where copper distance or interference would be a problem.
Power over Ethernet sends both data and power down a single network cable, so cameras, VoIP phones and wireless access points do not each need a separate outlet. Standards range from PoE (about 15 W) and PoE+ (about 30 W) up to PoE++ (roughly 60–100 W), which means cleaner installs and fewer power runs.
Both. We work directly with businesses across Indiana, and we also act as the on-site low-voltage and cabling partner behind general contractors and managed service providers who need their physical install layer handled to standard.
Cabling is infrastructure meant to last for years, so installation quality drives reliability. Work done by OSHA-certified technicians, terminated and tested correctly, then labeled and documented, makes faults easier to trace and future changes far less disruptive and costly.
We serve businesses across Indiana. The best next step is to tell us about your space and what you need — cabling, phones, cameras or access control — and we will help you scope it.
About Us
Connective Solutions LLC is a network infrastructure company serving businesses across Indiana. We focus on the physical and low-voltage backbone that everything else depends on — structured cabling, VoIP phone systems, surveillance and access control.
Our installations are carried out by OSHA-certified technicians, and we work with small businesses, contractors and managed service providers alike. The goal is the same on every job: clean, standards-based work that is tested, documented and built to last.
Start Your ProjectGet In Touch
Tell us about your space and what you need — cabling, phones, cameras or access control — and we'll help you scope the project.